One job, three agents at once. Wait for all three. Get one answer back.
PLAIN ENGLISH~5 MINNO SETUP NEEDED TO READ
01The whole idea
“Give me three takes on this pitch.” One job, three analysts, one combined answer.
1
The job arrives at the INBOX and reaches the SPLITTER.
2
The splitter sends a copy down every lane. Three desks start at the same time.
3
Each result rides to the JOINER. The joiner waits until all three are in.
4
It sends one merged crate onward — to a writer, or straight to the OUTBOX.
Two signposts, two jobs. The SPLITTER fans work out. The JOINER is a barrier: nothing leaves it until every branch has reported in.
02A splitter on its own shares the load
NO JOINER: TAKE TURNS
Each job goes down one lane, in turn: first east, then south, then east again. Two desks, half the queue — not double the spend.
JOINER WHERE THEY MEET: COPY TO EACH
When the lanes meet at a JOINER, every lane works at once. With COPY TO EACH, every lane gets the same job. SPLIT THE JOB (below) also uses a JOINER, but each lane gets only its own part. Every branch is a real run, so this stage costs once per desk.
You pick the mode. Click the SPLITTER: its Workflow panel card offers three choices.
COPY TO EACH — every branch works the same job, and the JOINER combines the results.
SPLIT THE JOB — the step before the splitter writes the job as numbered parts. Each branch gets only its own part, and the JOINER puts the parts back together. If only the INBOX feeds the splitter, this choice adds a PLANNER step before it. Give that step an agent; it runs once on every job, so it costs one more run.
TAKE TURNS — each job goes down one branch, and a MERGER sends each result on.
Switching swaps the JOINER or MERGER where the branches meet. Same belts, one UNDO. A choice the floor can’t make yet says why, right under the picks.
03Build one
Lay out the crew
Open BUILD › BUILD MODE. Place an INBOX, a SPLITTER, two or three BAYs side by side, a JOINER past them, and an OUTBOX.
the shape you are building toward
Fan out
BELT (or drag between machines): INBOX → SPLITTER, then SPLITTER → each BAY. Every belt must leave the splitter’s square on its own side. Two lanes minimum, or the splitter’s tile says NEEDS 2 OUT-LANES.
one belt out per side
Fan back in
BELT each BAY → JOINER, into the joiner’s square on different sides. Two lanes minimum, or the joiner’s tile says NEEDS 2 IN-LANES. Then JOINER → OUTBOX.
every branch comes home
Decide how long to wait
Click the JOINER. The default is 10 minutes for a late branch (you can set 1 to 120). If a branch is slower than that, the joiner sends what it has and marks the result partial.
the JOINER card
Give every bay an agent. Send one job. Watch three crates leave the splitter, three desks light up, and one crate leave the joiner.
// OR SKIP ALL FOUR STEPSCONVEYOR LINES9 has four ready-made crews: PARALLEL CREW, RESEARCH SWARM, SECOND OPINION, and LOAD BALANCER.
04The merger is not a joiner
There is a third tile called MERGER. It looks similar and does something much simpler: several belts come in, one belt goes out, and every crate rides straight through. It combines lanes, never jobs. Nothing to configure. Use it when two lines share one OUTBOX; use a JOINER when results must be combined.
// THE COST OF A CREWFan-out means every branch is a real model run. Three desks, three runs, three bills for that stage. Your line budget (the INBOX card, $2.00 per job unless you raise it) still caps the whole job — if it runs out mid-crew, you get what finished plus a note saying where it stopped.
05Something’s not running
NEEDS 2 OUT-LANES
On the splitter: only one belt leaves it. Run a second belt out of its square on another side.
NEEDS 2 IN-LANES
On the joiner: only one belt reaches it. Run a second belt into its square.
NOT FED — BELT INTO IT
A belt clips a corner of the splitter or joiner instead of passing through the square.
NO AGENT — CLICK
One desk in the crew is empty. The joiner would wait forever for it, so the lane stays dark until you fill the desk.
06Questions people actually ask
Do all three agents need to be the same class?
No. Different specialists on the same job is the whole point: in SECOND OPINION, two agents you pick each answer the same job on their own, and the joiner ships both takes.
What does the merged crate contain?
Every branch’s result, labelled by desk, in one crate. Put a writer after the joiner to turn three takes into one document.
What if I restart the app while a joiner is waiting?
The joiner’s waiting room is not saved across a restart — on purpose, so a stale half-job can never surprise you a week later. Parked branches are reported at boot and the job is marked superseded. Send it again.
Can I split, then split again?
Yes. A splitter downstream of a splitter fans out again, and one joiner at the end still waits for every leaf.