StarNet Help Download ↓
// FIELD MANUAL · START WITH THIS ONE

Conveyor basics

A job goes in one end. Finished work comes out the other.

THE JOB COMES INDOES THEIR PARTDOES THE NEXT PARTFINISHED WORK OUTthe INBOXa BAY — one agenta BAY — one agentthe OUTBOX
PLAIN ENGLISH~5 MINNO SETUP NEEDED TO READ

01The whole idea

You hand your station a job: “put together a report on my competitors.”

1

The job shows up as a box on the belt.

2

It reaches the first agent. Their part: dig up the data.

3

What they produced rides on to the next agent. Their part: turn it into the report.

4

The finished report lands in the out tray, ready to use.

That’s all a belt is: an assembly line for work. Each agent owns one part of the job and passes their output down the line. And the box is not a cartoon — when you see it move, an agent is really working, right then. Still floor = nothing running.

A BOXthe job, in transit
A DESKone agent, one part of the job
A BELTthe path the work takes
A LINEthe whole job, start to finish

02Why bother?

Each agent owns one part

One agent doing the whole job does every part half-well. On a line, the researcher researches, the writer writes, the checker checks.

The job runs without you

Hand work over at 3am, or have it arrive on a schedule. It moves through the line on its own. You come back to the finished thing.

You can watch the work

No spinner. No hidden queue. If your job is being worked on, you can see its box moving down the line.

03The four pieces

Open BUILD › BUILD MODE to build. Open the Conveyors tab: keys 1–8 pick BAY, INBOX, OUTBOX, SPLITTER, MERGER, JOINER, FILTER and LOOP.

THE FRONT DOOR
called an INBOX
Work from outside comes in here. A task you send in. A job on a schedule.
A DESK
called a BAY
One agent sits here. When a box reaches their desk, they do their part of the job.
THE OUT TRAY
called an OUTBOX
Finished work comes out here. Click it to collect it.
A SIGNPOST
FILTER · SPLITTER · JOINER · LOOP
Sits on the belt. Points boxes left or right.
// YOU CAN SKIP THE FRONT DOORChatting with an agent needs no belts at all. Belts are for real jobs — work with parts, work that should flow through several agents on its own.

04Build one

  1. Put down three things

    Open BUILD › BUILD MODE. Open the Conveyors tab. Place a front door, a desk, and an out tray in a row. Leave a small gap between each.

    INBAYOUT
    machines down, gaps left for belt
  2. Draw the belt

    Drag the INBOX onto the BAY, then drag the BAY onto the OUTBOX. The belt follows your pointer; R flips its corner. BELT remains an alternative: click one machine, then the next.

    drag → release
    drag one machine onto the next
  3. Give the desk an agent

    Click the desk and pick someone. Watch the belt: it lights up. Lit means “this will work.”

    CREWED — RUN LIVE
    a bound bay energizes the run
  4. Set a spending cap

    Click the front door. Give the line a name and a budget. If you skip this, it’s $2.00 per job, and that’s the most it can spend.

    6 HOPS · $2.00
    the INBOX card holds the caps
  5. Try it

    Close the build screen. Send your station a task. Watch its box come out of the front door, slide to the desk, and drop in. Your agent is on it right now.

    RUNNING
    a real crate = a real run
// OR SKIP ALL FIVE STEPSThe CONVEYOR LINES tool 9 drops a whole finished line in one click. See Build your first workflow.

05Is it working?

Lit belt = will work. Dark belt = something’s missing.

You don’t have to test anything. Every time you change a belt, the app checks it and shows the result on the floor right away.

GLOWING

This belt ends at a desk with an agent. It moves. Boxes will ride it.

DARK

Same belt — but the desk is empty. Nothing moves until you fix that.

// THE ONE EVERYONE HITSA belt that just touches the corner of a signpost does nothing. The belt must go through the signpost’s square: in one side, out the other.

06Four shapes cover everything

Same job, four ways to run it through your agents. Each shape is just belts plus one signpost.

ONE AFTER ANOTHERHAND-OFF
INAGENT AAGENT B

An assembly line. Each agent does their part and passes their output to the next. What comes out is the last agent’s finished work.

THIS WAY OR THAT WAYFILTER
FILTERcodeeverything else

The signpost reads each job and routes it to the right specialist. Code goes to the engineer. Everything else goes to the generalist.

ALL AT ONCESPLITTER
SPLITTER

A stream of jobs, three agents. The signpost deals them out so all three work at the same time. Nothing gets lost.

ROUND AGAINLOOP
LOOPDONEBACK → the earlier bay, up to 5 passes

Draft, critique, redraft. The work goes round up to 5 times, then comes out. It can never loop forever or overspend.

// THE EXPENSIVE MISTAKEDesk A sends to desk B, and desk B sends back to desk A? That would run forever and bill you forever. The app refuses to lay the belt that would close that circle, and tells you to use a LOOP to send work back.
// A BROKEN STEP NEVER EATS YOUR WORKIf a step fails or the budget runs out mid-line, you still get everything finished so far, plus one line telling you where it stopped.

07Hand work to another line

Drag an OUTBOX onto another line’s INBOX, or choose the destination under SEND TO in the OUTBOX’s Workflow panel. Each job that finishes cleanly starts a separate job on the target line, with that line’s crew and budget. This is a hand-off, never a belt. Choose NOWHERE to stop sending. If the line has no shared project folder, the OUTBOX card warns that the next line’s crew can’t open its files.

A hand-off that can’t go is never silent: the sending job says NOT sent on, with the reason, and the target line’s jobs show the attempt. That happens when E-STOP is on, the target line is at its daily limit or has no agent on its first step, a step of the job didn’t finish, the job would go round in a circle or has already crossed 4 lines, or 5 hand-offs are already waiting for that line.

Copy and move a line

Double-click a conveyor piece to select its whole line, or drag a box across empty floor. Ctrl+C / X / V / D copy, cut, paste and duplicate. R turns a paste ghost. The line card also offers COPY LINE and DELETE LINE. Copies keep settings and crew, but leave project folders, triggers and SEND TO destinations outside the selection behind. Inspect and configure the copy before running it. Click to select a piece, then drag it onto open floor to move it; Shift+drag always moves.

08Something’s not running

When a line won’t run, the reason is written on the machine itself — before anything costs you money. These are the words BUILD MODE prints; outside BUILD MODE the floor may word the same message differently. It’s almost always one of these four:

NO AGENT — CLICK

This desk is empty. Click it and pick an agent.

NOT ON A LINE — BELT INTO IT

No belt touches this desk. Drag another machine onto it to connect it.

NOT FED — BELT INTO IT

The belts don’t actually reach this desk. Usually one is clipping the corner of a signpost instead of going through it.

NOT CONNECTED — DRAG IT ONTO A BAY

The front door has no belt out. Drag the INBOX onto a BAY.

The other 15 messages, and what each one means
PLACE A DESK — TOOLS FOLLOW THE DOCK

One agent can staff as many desks as you like. This note only means its desks sit in different rooms and it has no workstation of its own, so it gets that room’s tools at each desk. Just a heads-up, it still runs. Give the agent a workstation and it uses the same tools everywhere.

A PROP SITS ON THIS LINE — MOVE IT

Furniture is sitting on a belt square. Move the furniture.

NEEDS 2 OUT-LANES

On a splitter: it needs two ways out. Run belts through it: in one side, out two.

NEEDS 2 IN-LANES

On a joiner: it waits for several belts to arrive. It needs at least two coming in.

NO DEFAULT LANE — CLICK

The filter doesn’t know where “everything else” goes. Click it and pick a lane.

LOOP! — BREAK THE CIRCLE

Your belts make a ring. Boxes would circle forever. Delete one square, or add a LOOP tile. (A new belt that would close a ring is refused as you draw it.)

WORK LINE LOOPS — CUT ONE HANDOFF

Two desks feed each other. That runs forever and bills forever. Cut one belt.

NO DONE LANE / NO BACK LANE

A LOOP tile needs two exits: one going onward, one going back.

TOO CLOSE — MOVE IT 1 TILE AWAY

This desk sits right beside the machine that feeds it, so the belt touches both at once and the job never arrives. Move one a tile apart, then belt them again.

NOT ON A BELT — BELT INTO IT

A signpost sits off the belts, so nothing passes through it. Belt into it: drag from the machine before it onto the signpost.

TOO LONG — RAISE THE LINE BUDGET

One job would run more stages than the line budget allows, so every job would stop part-way. Raise “max stages after the first” on the INBOX card, or shorten the line.

SENDS NOWHERE — PICK A LINE

This OUTBOX sends to an INBOX that is gone or starts no line, so nothing is sent on. Click the OUTBOX and pick a line under SEND TO, or NOWHERE.

SENDS TO ITSELF — PICK ANOTHER LINE

This OUTBOX sends its work back into its own line’s INBOX. Pick another line under SEND TO.

SENDS IN A CIRCLE — CUT ONE SEND TO

These lines send their work round in a circle, so every SEND TO on it is off. Set one OUTBOX’s SEND TO to NOWHERE or another line.

// NOTHING YOU DO HERE IS PERMANENTDELETE 5 removes anything, and UNDO brings it back. You cannot break your station by experimenting.

09Questions people actually ask

Do I even need belts?

No. You can just chat with an agent, no belts anywhere. Belts are for jobs that should flow through several agents on their own — especially ones that arrive while you’re away.

My belt is dark. Why?

It doesn’t end anywhere useful yet. Follow it to the end. You’ll find an empty desk, a gap, or a belt clipping the corner of a signpost.

Can two belts go to the same desk?

Yes. Boxes line up and wait their turn. One agent can also staff several desks.

What if it gets expensive?

Every line has a budget — $2.00 per job unless you raise it. At the cap it stops, hands over what it finished, and says so.

Does it stop when I close the window?

No. The work keeps going. The moving box is just a picture of it — the picture catches up next time you look.